BMX started in the early 1970s. After the inception of this bike, kids started to mimic the motorcycle races using their bicycles. Much later, racing became a competitive game, and the demands increased as well. Thus, freestyle BMX was made for bicycle race lovers.
Nowadays, bicycle racing has reached the international level and has been featured in the Olympics too. Professional riders support the sponsorship of BMX, as this is the best performing bike in the skate parks, for dirt jumps, and for street features. These features are possible only from the solid frame and strength of the bike. If you are a freestyle rider, you must know where this 29 Inch BMX Bike will best run.
Parks are obviously a great spot to BMX. This means generally the skate parks. Riding in these parks are natural for BMX riders, and the places are called ramps.
Riders who prefer the street get very creative with the different infrastructure like the rails, stairs and they do the tricky stunts with the bike.
Flatland has no external features, and the tricks are mostly done by the rider of the bike. This is also named breakdancing using the bike. On trails the riders jump into the air and perform tricks on dirt roads and areas. And with regards to racing, Bicycle motocross is the full form of BMX. The racing happens in a well-built place, and it is made for jumping performances.
If you are looking for a 29er BMX bike then, you need to know about the details. You must have knowledge about the materials, size, accessories and much more.
1. Material: 29 Inch BMX Bike is made of steel composition, which is also known as Chromoly. This is a type of alloyed steel that provides the best strength compared to other cheaper kinds. Chromo steel can be made thinner and lighter and it joins at the end for better strength.
You will also get better comfort while riding as it lessens the body pressure. For racing with this bike, you must opt for lightweight and stiffer frames, and for this aluminum is the best choice. If you are a professional bike racer then, you need an extra edge and carbon fiber frames are best for that. This material reduces the weight of the rider and has vibration lowering ingredients that are not included in aluminum material.
2. Sizing: Freestyle BMX is still popular among kids, and even adults love this. Although the wheel size remains consistent, you can have a different frame size as it fits you. In the case of flatland frames, this is the exception as it’s lighter than other options. On the other hand, when you are looking for race bikes, they will have a longer wheelbase and slacker head angle, which is for better speed and improved stability. You will get a broader range for race frames.
3. Wheels: The standard size for the wheel is twenty inches, which is smaller than road and mountain bikes. The wheels are smaller than the ones found in kid’s bikes which are roughly sixteen to eighteen inches, and the larger ones are twenty-two to twenty-four inches which are common in trail bikes used for jumping.
4. Rims: The standard width of a BMX bike is thirty-two mm, but this is for the freestyle one. If you are expecting hard hits for the wheels then you can go for the 36mm rim option. Aluminum is the main material of rims, and it can be triple, double, and single-walled. With more metal layers the bike will provide better support. The standard rim should be double-walled, as it will offer a good balance of weight and strength.
Professional riders who have increased demand for equipment, get their wheels built-in companies so they can get the right selection.
5. Spokes: This is another thing you have to consider when you are selecting the wheels for the new BMX. This part is laced from the hub and then ends at the rim. This is for relying on the tension and staying strong during movement. The number of spokes decides the strength of the wheel. In the case of freestyle BMX bikes, you will need 36 spoke wheels. Professional and advanced riders prefer 48 spoke wheels. On the other hand, race BMX will have twenty-eight to thirty six-spoke wheels
6. Tires: This is very important as the tires will stay in contact with the ground. The choice of tires will affect the speed you want for the bike. In this case, wider tires are best for smooth rolling, park, and street riding. When you want premium tires for the BMX, they will hold better pressure, and they will roll faster.
7. Hubs: This is the centerpiece of the wheel, and this includes the bearings based on which the wheels spin. Hubs are mostly made of alloy. There are also four types of hubs in BMX bikes such as cassette, free coaster, freewheel, and coaster.
8. Gearing: You must have heard the terms chainring and sprocket interchange. This is related to the gears of the 29 Inch BMX Bike. Although these vehicles do not have many gears, you have to check the number of sprockets and chainrings with the right pairing for these two things. This is also known as the ratio of gear. For BMX race bikes the rider requires explosive power, and for this bigger chainring is used
9. Cranks: This comes in one, two, and three-piece units. The single crank has a right and left spindle and crankarms and this is made of steel material. The arms are generally thin and not sturdy, this is best for kids who ride cheap BMX bikes. In the case of two-piece, the spindle is mostly attached to one arm, and the other stays separate. This is sturdier and thicker than the one-piece crank. Three-piece options are stronger than the one and two cranks, and they have both spindle and arms. Normally, you should choose the BMX with two or three cranks as it will provide better durability and strength.
Crank lengths usually range from 145mm to 190mm, but the most common type is 165mm. Race BMX crank lengths depend on the height of the rider and this is made of aluminum to lessen the weight.
10. Pedals: The best choice for freestyle BMX is a plastic-made pedal, which is lightweight and inexpensive. Also, this is less harsh than metal materials. You must know the size you need before purchasing the bike. If you are looking for race bikes then, go for clip-in or SPD pedals. These are better in providing extra power and can increase the speed when the gate drops. If you are new to these bikes then you can invest in flat pedals.
11. Saddle: Saddle isn’t that crucial for BMX bikes, but you can always opt for plastic-made materials. For entry-level riders, they can use a cushioned saddle, as the rider will be sitting down on it.
12. Rails: Similar to road and mountain bikes, BMX has rails on both sides that are joined to the seat post.
13. Handlebars: Freestyle bikes have steeper handlebars than race bicycles. These are made of aluminum and Chromoly, and this is lighter. In 24 inch BMX, there are no crossbars and have bigger wheels and frames.
14. Brakes: Rim brakes are the normal thing for BMX bikes, as the pads are attached to the rim just to slow the speed. U brakes are generally preferred for freestyle bikes, and it stays attached out of the way of the rider and inside the rear triangle. Different freestyle BMX comes with Gyro or a detangler in its braking technique.
A) Helmet: BMX bike helmets have a bowl shape and this is very important whether you are freestyling or in a race. In the competition and in training a helmet is compulsory and you have to pair it with a long-sleeved jersey and long pants. The BMX helmet has the right number of vents, and it covers the ears too. Wearing the helmet while riding will save you from landing complications, and it will save you from accidents.
B) Gloves: Whether you are racing or freestyling you will always need gloves for BMX bikes. You have to choose full-fingered ones, s it will help you get a good grip on the handlebars.
C) Shoes: When you are riding with clip-in pedals, you have to buy particular clip-in shoes that provide better comfort and stiffness.
D) Pegs: These are metal cylinders that have to get attached to the axels of the bike so the rider can stay balanced while performing grinds or doing tricks on flatland. For flatland, the bike will require pegs on all axels. However, pegs are now banned from BMX racing.
Check out these informative details on BMX bikes and you will get a good idea of what type of bicycle you want to buy. Make sure to go through the list of accessories as those are the integral parts of BMX bikes.
Biking is one of the most popular recreational activities in the United States, enjoyed by individuals of all ages throughout the country. For more experienced bikers looking for an intense workout, BMX bikes are a great option, possessing an impressive array of high-quality features. BMX bikes are primarily used for indoor dirt track racing and stunts and are specifically designed to handle nearly any environment possible.
29-inch BMX bikes are far larger than most standard BMX models, which typically range from 12 to 26 inches. While 29-inch models can still perform some stunts characteristic of BMX, they are focused more on comfortable riding. A typical 29-inch model would best serve the needs of an individual seeking to balance moderate stunt driving with off-road or urban travel.
The biggest standard BMX bike size is 26 inches and is only practical for individuals who have a height of at least 5 feet, 4 inches. Most users of this size probably have a height ranging from 6 feet to 6 feet, 3 inches. While some BMX bikes do come in sizes up to 29 inches, these models are rare and difficult to find on the market. It is important to note that bike size is typically measured as the length of the top tube of the vehicle frame.
Save on components (batteries, fenders, tires), accessories and apparelBrowse e-bikes, cruisers, hybrid, commuter & moreAll bikes come 80% built
Browse cruiser, commuter, hybrid, comfort & limited edition bikesView accessories & apparelStep-thru and fat tire bikes are available as well
Most professional BMX riders use a 20.5-inch to 22-inch top tube frame, a smaller size not much larger than most models commonly used by children. The smaller frame significantly speeds up reaction time by shortening the length from the handlebars to the wheels, giving the rider more control over the bike. As a result, individuals are given far more maneuverability over the bike, necessary for navigating the tight and crowded confines of BMX racing venues. The smaller, more maneuverable structure is also better able to withstand the constant abuse of a rugged indoor dirt course, absorbing constant bumps and shocks without breaking down.
Although BMX bikes are more commonly associated with juvenile use, they can be enjoyed by adults as well. Most frames with a top tube length of at least 21 inches are more than sufficient to provide a stable structure for an adult-sized body. The specific size of the bike needed for an adult may also vary depending on the activities that they want to perform. An individual who wants to focus on completing difficult tricks and stunts on an advanced course should get a smaller frame ranging from 20-22 inches. Those who would rather engage in a more balanced approach toward BMX, shifting between more moderate stunts and off-road biking, would be better suited with a larger frame ranging from 23-26 inches.
Adults who are new to BMX should usually avoid using a bike with a frame size of 20 inches or less, as the increased maneuverability in this size can be difficult to control. They should always remember to wear plenty of protective gear with knee and elbow pads, sufficient for less experienced BMX riders. Adults may also want to consider helmets, shin guards, and gloves to provide additional protection if they are looking to learn more advanced BMX techniques.
Although BMX’s popularity hasn’t reached the heights of its glory days in the 1980s, it still has established a significant presence in the cycling market. Commonly linked with different sports in the X games such as skateboarding, BMX was able to establish a niche market and withstand the rise of the mountain biking industry in the early 1990s. Part of its enduring quality is that, unlike many traditional cycling sports, BMX can be enjoyed year-round as many indoor tracks and parks are readily available.
Another reason for its continued popularity is the work of Mat Hoffman, one of the best BMX riders of all time. Hoffman became the youngest professional BMX biker at 15 years old, and eventually became one of the richest. He invented several new tricks including the flair, backflip, 900, and double peg grind, all while amassing 6 different medals, including 2 golds, at the X games from 1995-2001. Hoffman has produced several shows and movies related to BMX and has founded two different companies, Hoffman Bikes and Hoffman Promotions.
Further elevating the sport are several different major BMX tournaments that are held throughout the world every year. Some of the most significant tournaments include the UCI BMX World Championships, the UCI BMX Freestyle World Championship, the UCI BMX Freestyle World Cup, and the UCI Pump Track World Championships. Since 2008 in Beijing, BMX has been a part of the Olympics, and also became a part of the Youth Olympic Games in 2010 in Singapore.
The most effective way to lighten a BMX bike is to remove unnecessary or expendable parts contained throughout the structure. The kickstand is a feature most experienced bikers do not need and can easily be removed from the frame. Because many BMX riders do most of their biking during the day, the reflectors can be taken off to lighten the bike. Bike pegs also add a lot to the weight of the bike without adding much value and should be removed.
Another way to lighten a BMX bike is to cut off pieces of the structure, a tactic often used by experienced BMX riders. Handlebars are often too wide and can be cut down without much difficulty. The steerer tube also contains about an inch more length than is necessary, and the seat post can often be shortened as well. Hub axles are another area of the bike that can be cut down.
Cyclists should also consider replacing bike parts to reduce weight. Finding lighter replacement parts for the seat and wheels is an easy task while investing in full chrome-moly or titanium forks will further lighten the bike. Handlebars are also easy to replace, and if an individual prefers to have pegs on their frame, they can opt to utilize plastic pegs which are much lighter than their metal counterparts.
To become a professional BMX biker, an individual must constantly develop their cycling skills, working on their craft several hours a day year-round. Individuals who live in colder climates need to find indoor cycling venues and tracks to practice at during the winter months. They need to always challenge themselves to increase the difficulty of their tricks, albeit safely and responsibly.
Individuals should then enter as many competitions as possible to earn prize money and catch the eye of sponsors and peers. Filming cycling progress and newly developed tricks are also advisable for prospective professional BMX bikers and will help to create a brand presence that major sponsors gravitate toward. Outlets such as YouTube and Instagram have proven to be great assets in skyrocketing the careers of many BMX drivers. Also, being a friendly person and reaching out to others will help to expand a network once a BMX biker begins to establish a name for themself.
Choosing the right BMX bike will hinge on a variety of factors including an individual’s height, weight, ability level, bike riding style, and budget. Height is probably the biggest factor in determining the size and type of BMX bike for a person. Below are the corresponding top tube and wheel sizes for different heights.
Individuals also have to determine the environment and type of riding they plan to engage in. Bikers more focused on the racing elements of BMX will need a model that is comprised of lighter materials and a large sprocket ideal for speed and acceleration. Bikers who plan to focus on tricks and stunts will need accessories like detanglers and pegs to create a versatile model able to withstand hard falls and maneuver quickly.
BMX stands for bicycle motocross and refers to both dirt riding and street jumping bike riding techniques.
BMX biking usually occurs on venues with tracks or other closed courses that are specially designed with man-made obstacles. Races are typically shorter in length and focus on tricks and showmanship. Mountain biking occurs outdoors on a wide variety of surfaces including dirt trails, gravel roads, paved roads, all while traveling up and down mountains or steep hillsides. Races or courses are usually longer and possess natural obstacles, with less focus on trick difficulty and showmanship.
Bicycle motocross (BMX) is one of the most popular forms of biking activity in the world, combining racing ability with stunt performing in an enclosed racecourse. Since its creation in the late 1960s, it has established a strong presence by appealing to both the biker and skateboarding market. Because of the great variety of BMX bikes and courses, it is an activity for people of all ages and sizes.